Palmer M60 & P60 Engines Rebuilt by DYS

Rebuilt & Shipped to Maryland

This Palmer M60 Engine & direct drive Transmission were remanufactured by DYS for an local client. When his boat plans changed, the engine was sold by DYS and shipped to the east coast. The cold grey color was accented with a bright blue flywheel and oil pan. It will be installed into a restored motor launch.

Rebuilt & Shipped to Minnesota

This Palmer P60 Engine and transmission were remanufactured by DYS for a customer in Minnesota. Critical to this rebuild was a complete redo of the distributor, which had an after market electronic ignition, but a broken advance system below it. The engine performed great on its test run, and was shipped back to the Customer in Minnesota.

Rebuilt & Shipped to Maine

This Palmer M60 engine was shipped to DYS, after it got water in the oil. DYS completely dis-assembled the engine and discovered a faulty head gasket. All parts were cleaned, painted and rebuilt. The engine was test run, then crated and shipped back to the Customer in Maine.

Rebuilt & Delivered to Los Angeles

This Palmer 60 was the start of a restoration project on a 34’ Columbia. It had water in the oil, so DYS rebuilt the Engine, Transmission, and V-Drive Gear, then test ran it. The completed engine was delivered to the Customer’s vessel in Los Angeles, CA.

Rebuilt & Shipped to Ohio

This Palmer M60 engine was shipped to DYS from Cleveland, OH in need of a rebuild. It was completely dis-assembled, cleaned and painted, and rebuilt, with several upgrades before being test run. After a successful test run, it was crated and shipped back to the Customer in Ohio.